47.5 in. x 37 in. x 26.5 in. (120.7 cm x 94.0 cm x 67.3 cm)
Weight
1025 lbs (465 kg)
Maximum Heat Dissipation into the Room
1.0 kW (3400 Btu/hr)
Noise Level
57 dBa
Installation Category
II
Pollution Degree
2
Set Speed
1000 rpm to 80 000 rpm in increments of 100 rpm
Speed Control
Actual rotor speed will be +/- 50 rpm of the set speed (above 1000)
Speed Display
Indicates rotor speed in increments of 10 rpm at speeds below 1000 rpm, and increment of 100 rpm at speeds above 1000 rpm
Set Time
Up to 99 hours and 59 minutes; HOLD for runs of unspecified length
Time Display
Indicates time remaining in timed runs, time elapsed in HOLD runs, or estimated time remaining in ?2t runs
Rotor Temperature
Set Temperature
0 to 40 deg C in increments of 1 deg C
Temperature Control
+/1 1 deg C of set temperature
Display
Indicates rotor temperature in increments of 1 deg C
Stability
Within 0.3 deg C of set after equilibrium is reached
Acceleration
Selection from two profiles: maximum acceleration from 0 rpm to set speed, or slow acceleration from 0 to 500 rpm, followed by maximum acceleration to set speed
Deceleration
Selection from three profiles: full dynamic braking to 0 rpm, slow (full brake to 500 rpm followed by reduced braking to a gentle stop), or no brake
Operation
Standard, programmed, or delayed start; instrument memory can store up to nine individual programs
Revolution Corner
Displays accumulated total number of rotor revolutions in tens of thousands
Barrier Ring
41-mm (1.63-in.) heat-treated steel alloy armor ring surrounded by a 12-mm (0.50-in.) steel vacuum chamber to provide full protection for the operator
Door
17.5-mm (0.69-in.) high-strength structural steel
Vacuum
Diffusion pump in series with a mechanical pump reduces chamber pressure to below 5 microns (0.7 Pa)
현재위치 : Home > 판매완료된장비
