SANYO MLS-Series top-loading autoclaves provide a safe, reliable high pressure steam sterilizing environment within a self-contained unit that is particularly easy to use. These reliable, energy saving autoclaves are ideal for a wide range of applications.
Features and Benefits
Low-Profile Design
The top of the autoclave chamber is only 641 millimeters from the floor.
This low-profile deign makes it very easy to load the sterilizing baskets.
Swing-Top Door
The door opens upwards, so no slide open space is required.
This makes the 37-centimeter wide chamber easy to access, and a low-profile design is also made possible.
The MLS-3780 offers 75-litre capacity.
Large Diameter Chamber
The 13 inch diameter wide x 26 inch long chamber offers ample capacity.
Up to four 1000ml flasks will fit easily into one sterilizing basket.
Also, two racks holding 50 test tubes can fit into one basket.
Microprocessor Temperature Control
Sterilizing temperature is controlled by microprocessor to within +2C/-0C of the set temperature in the range of 105C to 135C.
Double Interlocking Structure
To ensure the safe operation of this high-temperature, high-pressure autoclave, the chamber and the open/close lever are controlled by a double interlock system dependant on temperature and pressure sensors. In this way, it is impossible to open the autoclave until temperature and pressure levels are safe.
Air Vent Control
The exhaust valve release temperature can be set to allow automatic release after the sterilizing cycle has been completed. The setting range is from +0C to 25C above boiling point to suit the items being sterilized (patent pending).
Ergonomic Design
SANYO has included a host of features to make this autoclave user friendly.
A heat-insulating resin coating and corners are gently rounded to simplify cleaning.
The control panel is mounted on top so its easier to see and use.
A clip-on drainage hose and an exhaust air tank simplifies filling and emptying.
The lever locking system offers additional safety.
Programmed Functions
Pre-sets are programmed for sterilizing, preparing and maintaining culture media. Four courses with three variations offer a total of 12 programs.